
KEEP BUSINESS UNDER COVER
Commercial Roofing in
Chilliwack & the Fraser Valley
A commercial roof needs a clear plan that accounts for the building beneath it. R. Brown & Sons commercial roofing in Chilliwack & Fraser Valley begins with a thorough assessment of roof condition, drainage, access, and the specific work required to keep your property fully protected.
LET’S DISCUSS YOUR PROJECT
✓ Commercial roof assessments and repairs
✓ Flat and low-slope roofing enquiries
✓ Replacement planning and maintenance
01
Start with the building
At R. Brown & Sons Roofing, every commercial roofing project starts with understanding the building. We assess the roof’s slope, drainage, existing materials, and rooftop equipment to determine what the property needs. By considering how the building is used and planning around access and operations, we can recommend a practical roofing solution built around the needs of your business.
02
Plan around operations
At R. Brown & Sons Roofing, we understand that commercial roofing work needs to fit around your business. We plan each project with tenant access, work areas, deliveries, and scheduling in mind to help minimize disruption. With a clear scope of work outlining the repairs or replacement required, you know what to expect before the job begins.
03
Maintenance or replacement?
At R. Brown & Sons Roofing, we assess the condition of your commercial roof to help determine whether repairs, ongoing maintenance, or a full replacement makes the most sense. Recurring leaks, standing water, and deteriorating roofing details can signal underlying problems that need attention. We focus on identifying the cause, explaining your options, and recommending a practical solution that protects your building and supports its long-term performance.
48 YEARS OF COMMERCIAL ROOFING
Commercial Roofing Across Chilliwack & Fraser Valley Since 1978.
Commercial roofing and new construction have been an important part of R. Brown & Son’s Roofing’s work for generations. Since Robert Brown started the business in 1978, the industry has evolved, building standards have advanced, and the demands placed on roofing systems have continued to grow. Today, the same family commitment carries forward across Chilliwack and the Fraser Valley, with a focus on quality workmanship, dependable materials, and roofing built to perform for the long term. From commercial roofing projects to new construction, the standard remains the same: do the work right.
It protects what your business depends on
A commercial roof protects more than the building itself. It safeguards inventory, equipment, tenant spaces, and the day-to-day operations that keep a business running. When a leak develops, the cost can extend well beyond ceiling damage, disrupting operations, damaging valuable assets, and affecting the people who rely on the space. A dependable roofing system helps protect both your property and your ability to operate with confidence.
The details make the difference
On flat and low-slope roofs, long-term performance often comes down to the details. Drains, scuppers, parapets, curbs, and rooftop equipment all require careful attention to prevent water from finding its way inside. Proper drainage, sound installation, and well-executed flashing are essential to a roofing system built to withstand the elements and perform reliably over time.
It protects your investment over time
A commercial roof is a significant part of a building’s long-term value. Its condition, warranty information, and maintenance history can all matter during insurance reviews, building assessments, and property sales. Keeping records of inspections, repairs, and maintenance helps demonstrate how the roof has been cared for and makes it easier to plan for future needs. Quality workmanship and consistent maintenance help protect your investment for the years ahead.
REPAIR OR REPLACE?
When a commercial roof is beyond repair
Not every leak means a new roof. Damage at one drain, a failed curb, or an isolated area of membrane is often a targeted repair, and we will tell you so rather than quote a replacement. The answer changes when water has spread through the roof system, when repairs keep returning to the same areas, or when the roof has reached the end of its service life — at that point patching only delays the work and pays for part of it twice.
The reason to decide early is that deferred commercial roof work reaches further than the roof: wet insulation, interior and tenant damage, lost use of a space, and emergency work at the worst time of year. A planned replacement can be staged, scheduled around operations, and budgeted. An unplanned one cannot.
SIGNS A COMMERCIAL ROOF IS BEYOND REPAIR
- Leaks that return after a repair, or an active leak that never fully stops
- Ponding water that remains well after the rain has stopped
- Blisters, splitting seams, or membrane that has pulled away
- Deteriorated flashing at parapets, curbs, drains, and penetrations
- Potential moisture trapped beneath the surface, including saturated insulation that may not be visible during a surface-level inspection.
- A roof at, or past, the end of its expected service life
One or two of these on a sound roof can still be a repair. Several together, or any of them on an older roof system, is usually the point where replacement is the better value on the balance sheet as well as on the building.
THE PROCESS
What a commercial roof project looks like
The same sequence on every building, adjusted for the roof, the access, and the way the property operates. You know what happens, in what order, and what you receive at the end of it.
01
Start with the building
Send the property location, the building type and use, the approximate roof area, the roof system and age if you know them, and what you are seeing. Access restrictions and operating hours are worth mentioning up front.
02
Assessment of the whole roof
We look at the roof surface, drainage and outlets, flashing, penetrations, and rooftop equipment — and at the deck and interior where access allows. On larger roofs, a moisture survey shows where the system has taken on water.
03
A written scope and estimate
What is repaired or replaced, the system and membrane proposed, how the details are handled, how the site is staged and protected, and how access is managed. In writing, so it can be compared line for line.
05
Removal and moisture checks
Where the scope calls for it, the old membrane comes off and the substrate is inspected. Wet insulation and deteriorated decking are identified and replaced — not covered over with new roofing.
07
Cleanup, walkthrough and documentation
Site cleared and materials removed, a walkthrough with you on the finished work, and the warranty and insurance documentation handed over — with photos of the completed roof for your records.
04
Planning around operations
Tenant access, work areas, deliveries, parking, hours, and scheduling agreed before anything starts. A commercial project is planned around the building and the people in it.
06
Building the roof system
Insulation, membrane, and drainage set to the manufacturer specification, with new flashing at parapets, curbs, and every penetration, and rooftop equipment reinstated and sealed.
05 / THE SHINGLES WE STAND BEHIND
Why we use IKO & CertainTeed.
A roof is only as dependable as the shingles on it. After decades working across the Fraser Valley, we install two brands because they have proven themselves here in real weather, on real homes, and when a warranty claim is actually needed.
IKO
Manufactured in Canada and purpose-built for cold, wet climates, the IKO Cambridge line is a proven choice for Fraser Valley homes. At R. Brown & Sons Roofing, we regularly install Cambridge Dual Black with raised-ridge packages for their heavier weight, reliable seal, and outstanding wind resistance results you can see in our recent work.
PRIMARY
CertainTeed
CertainTeed is a trusted North American manufacturer known for reliable products and strong warranty support. The Landmark shingles we install hold up exceptionally well to Fraser Valley weather and are fully backed when a claim is needed.
PRIMARY
Brand selection reflects our professional experience in the Fraser Valley. Warranty coverage is set by the manufacturer and confirmed per product and installation.


THE STANDARD
The standard we build to
10-year workmanship warranty. Full WCB coverage. Licensed and insured. CertainTeed ShingleMaster. IKO certified installer.
IKO ShieldPRO plus+
ROOFING CONTRACTOR

CertainTeed ShingleMaster
CERTIFIED INSTALLER

WorkSafeBC
FULL WCB COVERAGE

Trusted premium partners
Over our 48-year history, we have forged strong alliances with industry leaders to ensure every project meets our premium standards. These trusted partnerships allow us to provide the highest caliber of materials for your property.
Roofing in Chilliwack
Most of our work sits within a short drive of home. Tell us where you are and what your roof needs.
Chilliwack
Sardis
Promontory
Rosedale
Ryder Lake
Agassiz
Elsewhere in the Fraser Valley?
Enquiries from Abbotsford, Mission, Harrison, and the surrounding communities are welcome.
📍 WHERE WE WORK
Based here.
Working here.
We welcome enquiries from our own communities and from across the Fraser Valley. Availability is confirmed for your address and the work involved.
◉ 06 / START WITH A CONVERSATION
Let’s talk
about your roof.
A small repair or a fresh start. Tell us what you’re seeing, where you’re located, and what you have in mind.
WHAT HAPPENS NEXT
Your enquiry is saved for review. The next step is to confirm the details and arrange an assessment where needed not an instant price or a confirmed booking.
By submitting, you agree that your contact and project details will be stored to review and respond to this enquiry. Please don’t include sensitive personal information.
-(No%20Text).png)











